PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : HOW TO JAILBREAK/ACTIVATE A 1.1.2 OTB (Bootloader 4.6) and USE IT WITH TURBOSIM



RaDiO.InSiDer
29.11.2007, 15:37
HOW TO JAILBREAK/ACTIVATE A 1.1.2 OTB (Bootloader 4.6) and USE IT WITH TURBOSIM

ich werde euch, diese Anleitung noch ins deutsche Übersetzen und bebildern. LG luckytanke

DOWNGRADE YOUR 1.1.2 OTB to 1.1.1


1. download 1.1.1 firmware here:

http://appldnld.apple.com.edgesuite.. ..a_Restore.ipsw


2. start iPhone in recovery mode: press both, sleep and home button for 10 seconds, as soon as the display turns black, release the sleep button but still hold the home button for another 10 seconds


3. connect the iPhone to your PC and start iTunes 7.5; iTunes will report that it found an iPhone in recovery mode; press the restore button WHILE holding the SHIFT-***; in the upcoming filechooser just choose the 1.1.1-firmware-file (iPhone1,1_1.1.1_3A109a_Restor e.ipsw) you just downloaded; iTunes will now downgrade the iPhone to 1.1.1 (which may take a while) and then report the errorcode 1015, which is not important and can be dismissed.


4. shut down iTunes


STEP 1 - DONE!


-------------------------------------------------------------------------------------------------------------------------

STEP 2 - JAILBREAK and ACTIVATION


1. download iBrickr here:

http://ibrickr.com/downloads/ibrickr_v0.91.zip


2. Unzip it to a folder of your choice on your PC


3. download and unpack MobileDevice_7_4_2_framework here:

http://rapidshare.com/files/68410680/MobileDevice_7_4_2.framework.z ip.html

(maybe in the domainname there is a _ which needs to be removed....)


4. start iBrickr it will prompt you on how to get your phone out of recovery mode.


STEP 2 - DONE! Your iPhone is now jailbroken and activated; all functions except making/receiving calls and sending/receiving SMS should be working.

-------------------------------------------------------------------------------------------------------------------------

STEP 3 - PREPARING and INSTALLING THE TURBOSIM


1. on your iPhone, go to Settings -> General -> Auto Lock -> Never


2. connect your iPhone to your WLAN (keep in mind or write down the IP your iPhone will have in your WLAN)


3. on your iPhone, start the Installer and install the following: BSD Subsystem, CommunitySources, openSSH and OctoPrep


4. download and unzip these files to your PC:

http://rapidshare.com/files/71974453/turbosim_rev2.zip.html
http://rapidshare.com/files/71977708/ComCenter_Disabled.zip.html

(maybe in the domainname there is a _ which needs to be removed....)


5. download and open WinSCP (if you don´t have it already) here:

http://winscp.net/download/winscp405setup.exe


6. with WinSCP connect to your iPhone; Protocol: SFTP / Server: your iPhones´ IP (see above) / Username: root / Password: alpine


7. use WinSCP to copy the file "applesaft.trb" (from the folder turbosim_rev2) to the iPhone-folder /private/var/root


8. use WinSCP to copy all OTHER files (except "applesaft.trb") (from the folder turbosim_rev2) to the iPhone-folder /bin


9. mark the copied files in the folder /bin, right-click Info and give them 0755-rights


10. use WinSCP to copy the file "com.apple.CommCenter.plist" (from ComCenter_Disabled/Disabled) to the iPhone-folder /System/Library/LaunchDaemons/


11. restart your iPhone


12. cut out both SIMs, the original one supplied with the phone and your own, so they will fit perfectly into the TurboSim - do it carefully!


13. put the original SIM supplied with the iPhone (not your own!) into the TurboSim and carefully insert it into your iPhone


14. Download PuTTy:

http://the.earth.li/~sgtatham/putty/.../x86/putty.exe


15. start the PuTTy and connect using your iPhone IP address as the host name.


16. PuTTy should ask for a username, type "root". The root-password, which is "alpine" - so type "alpine" and hit Enter


17. type "turbo-info" and hit Enter - some numbers should appear followed by an "OK. No Error" - or similar


18. type "turbo-app /private/var/root/applesaft.trb" - so the file you copied to that location via SFTP will now be executed; after that an "OK" should appear


19. rename the file "com.apple.CommCenter Kopie.plist" (on your harddrive) to "com.apple.CommCenter.plist" (so without " Kopie", which is just the german word for copy) so that the name is identical with the one in the "disabled"-subfolder


20. use WinSCP to copy the file "com.apple.CommCenter.plist" (the one you just renamed) to the iPhone-folder /System/Library/LaunchDaemons/ - so the original file will be there again (and not the "disabled" one)


21. restart your iPhone


22. on your iPhone go to Settings -> Phone -> SIM Applications -> Apple Saft -> Set


23. remove TurboSim and original SIM from the iPhone (carefully!)


24. replace the original SIM with your own and put TurboSIM and your own SIM back into the iPhone (carefully!)


25. restart your iPhone


STEP 3 - DONE! Your iPhone should now be fully operational, BUT calls and SMS still won´t be possible as no carrier will be found, so you will have to proceed to STEP 4 and upgrade the iPhone to 1.1.2 again...

-------------------------------------------------------------------------------------------------------------------------

STEP 4 - UPGRADE TO FIRMWARE 1.1.2 again and JAILBREAK and ACTIVATE again


1. start iTunes, it should prompt if you wish to update to Firmware 1.1.2. just do so; this may take a while


2. shut down iTunes


3. download and unpack this:

http://conceitedsoftware.com/iphone/1.1.2-jailbreak.zip


4. open "jailbreak.jar" (JAVA has to be installed) and wait til the process is finished, iPhone will reboot twice during this


STEP 4 - DONE! Your iPhone should now be fully functional with FW 1.1.2 on it

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


Some hints:
--------------

- IF after using the "turbo-info" command in Terminal NO numbers and NO "OK" appear but THIS ouput :"/dev/tty.baseband: Resource",

-> this will mean that you FORGOT to replace the original CommCenter-file with the "disabled" one (see STEP 3/10) OR copied a WRONG
CommCenter-file to that folder. Also take care about STEP 3/19 which states that the "original" file must be named to match the "disabled" one.

-------------------------------------------------------------------------------------------------------------------------

- IF your phone won´t receive any calls but instead just displays a rotating cycle-icon and/or
- IF you aren´t able to just dial a number (but only to choose a contact from the contactlist and dial THAT way) and/or
- IF the phone just returns to the mainscreen when you go to Phone -> Keypad and then enter the first digit......

-> here is the solution: you are in a not supported country.
Supported countries (by November/07) are: US, Canada, UK, Germany, France, Italy, Japan and China

You should run Tweaks 1.1.2/iWorld from the AppTapp Installer, that should solve the problem.

-------------------------------------------------------------------------------------------------------------------------

- IF you wish you can remove all the files you uploaded to /bin (see STEP 3/8) once the TurboSIM is programmed and working.

-------------------------------------------------------------------------------------------------------------------------